EZ-mtb - Semi-metal Brake Pads - Shimano AVID E1 / SRAM XX (Set of 2)

EZ-MTB Semi-Metal Brake Pads – Avid E1 / SRAM XX

Set of 2 Pads

General Description

The EZ-MTB Semi-Metal Brake Pads deliver reliable braking power, controlled modulation and consistent performance in both wet and dry conditions. Manufactured from a high-performance blend of Kevlar, copper and resin, they combine the quiet operation of organic pads with the improved durability and heat resistance of metallic compounds.

Designed for selected Avid and SRAM disc brake systems, these pads provide effective stopping power with minimal lever effort. The set includes two brake pads, suitable for servicing one brake caliper.

Key Features

• Semi-metallic braking compound
• Kevlar, copper and resin composite material
• Strong and controlled braking performance
• Consistent operation in wet and dry conditions
• Good heat dissipation during demanding rides
• Quieter operation than fully metallic brake pads
• Reduced rotor wear compared with sintered compounds
• Smooth braking feel and predictable modulation
• Excellent durability for recreational and performance riding
• Replacement spring included
• Suitable for mountain bikes, e-bikes and general off-road use
• Two pads service one brake caliper

Technical Specifications

• Brand: EZ-MTB
• Product Type: Bicycle disc brake pads
• Pad Compound: Semi-metallic
• Compound Materials: Kevlar, copper and resin composite
• Brake Type: Hydraulic disc brake
• Performance Conditions: Wet and dry
• Noise Level: Lower than typical fully metallic pads
• Heat Resistance: Higher than standard organic pads
• Rotor Wear: Moderate to low
• Application: MTB, trail, cross-country, recreational and e-bike riding
• Package Contents: 2 brake pads and replacement spring
• Calipers Serviced: One
• Installation Position: Front or rear, depending on the compatible brake caliper

Compatible Brake Systems

These pads are compatible with selected models including:

• SRAM XX
• SRAM XO
• SRAM DB1
• SRAM DB3
• SRAM DB5
• SRAM Level
• SRAM Level T
• SRAM Level TL
• Avid Elixir 1
• Avid Elixir 3
• Avid Elixir 5
• Avid Elixir 7
• Avid Elixir 9

Additional Information

Semi-Metallic Performance

Semi-metallic pads provide a practical balance between organic and fully metallic compounds. They offer quieter braking and reduced rotor wear compared with many sintered pads, while providing better heat management and durability than standard resin pads.

Recommended Use

These pads are well suited to everyday mountain biking, cross-country, trail riding and commuting. They can also be used on compatible e-bike braking systems, subject to the bicycle and brake manufacturer’s requirements.

Bedding-In Procedure

For the best braking performance, new pads should be correctly bedded in after installation:

1. Accelerate the bicycle to a moderate speed.
2. Apply one brake progressively until the bicycle slows to walking pace.
3. Release the brake before coming to a complete stop.
4. Repeat approximately 15–20 times for each brake.
5. Allow the pads and rotor to cool before demanding use.

Avoid sudden emergency-style stops during the initial bedding-in process.

Installation Advice

• Confirm compatibility by comparing the new pads with the existing pad shape
• Clean the brake rotor using an appropriate disc brake cleaner
• Do not touch the braking surface with bare or greasy hands
• Ensure the caliper pistons move freely before installation
• Replace both pads in the caliper at the same time
• Never mix old and new pads in the same caliper
• Have installation completed by a qualified bicycle mechanic if unsure

Compatibility Notice

Despite some retailer titles mentioning Shimano, this E1 pad shape is primarily listed for compatible Avid and SRAM brake systems. Compatibility with Shimano calipers has not been confirmed. Brake model names and pad shapes can vary between generations, so compare the original pads or check the caliper model before ordering.