EZmtb - Hydraulic Brake Line Hose - 4-Layer Black

EZ-MTB 4-Layer Hydraulic Brake Line Hose – Black

General Description

Replace or upgrade your hydraulic brake line with the EZ-MTB 4-Layer Hydraulic Brake Hose. Featuring a fluoropolymer inner tube, reinforced Kevlar fibre braiding and a scratch-resistant nylon exterior, it is designed to provide reliable fluid transfer and a consistent brake-lever feel.

The hose can be cut to the required length and used with a wide variety of bicycle, e-bike and compatible electric scooter hydraulic brake systems when paired with the correct hose-end fittings.

Key Features

• Reinforced four-layer construction
• Fluoropolymer inner hose
• Kevlar fibre reinforcement helps limit expansion under pressure
• Scratch-resistant nylon outer casing
• Supports consistent hydraulic braking performance
• Suitable for mineral-oil and DOT systems when correctly configured
• Compatible with multiple major brake brands
• Can be cut to the required installation length
• Suitable for front or rear brake applications
• Available in 1-metre and 1.7-metre lengths
• Durable black finish

Technical Specifications

• Brand: EZ-MTB
• Product type: Hydraulic brake line hose
• Construction: Four-layer reinforced design
• Inner hose material: Fluoropolymer
• Reinforcement: Kevlar fibre braiding
• Outer casing: Scratch-resistant nylon
• Internal diameter: 2.1 mm
• External diameter: 5 mm
• Available lengths: 1 metre and 1.7 metres
• Colour: Black
• Application: Hydraulic disc brake systems
• Suitable positions: Front or rear brake
• Installation: Cut-to-length
• Hose-end fittings: Required and sold separately unless otherwise stated

Brake-System Compatibility

Compatible with selected hydraulic brake systems from brands including:

• Shimano
• SRAM
• Avid
• Magura
• Tektro
• Formula
• Hayes

Compatibility depends on using the correct barb, olive, compression nut or banjo fitting for the specific brake lever and calliper. The hose is not a universal plug-and-play replacement without the appropriate connectors.

Required Installation Components

Depending on the braking system, installation may require:

• Compatible barbed inserts
• Compression olives
• Compression nuts
• Straight connectors
• Banjo fittings
• Hose covers
• Mineral oil or DOT brake fluid
• Brake-bleeding tools

Fittings, brake fluid and installation tools are not included unless specifically stated.

Installation Information

Cut the hose squarely using a dedicated hydraulic hose cutter. Install the correct fittings and tighten all components according to the brake manufacturer’s specifications.

After fitting the hose, refill and bleed the system using only the brake fluid specified by its manufacturer. Check carefully for leaks and confirm correct braking operation before riding.

Hydraulic brakes are safety-critical components. Professional installation by a qualified bicycle or scooter technician is recommended.

Important Safety Information

• Never use DOT fluid in a mineral-oil braking system
• Never use mineral oil in a DOT-compatible system
• Do not reuse damaged olives, barbs or sealing components
• Replace the hose if it becomes crushed, kinked, cracked or abraded
• Keep brake fluid away from brake pads and rotors
• Confirm fitting compatibility before cutting the hose
• Test the complete braking system in a controlled area after installation

Package Contents

• 1 × EZ-MTB 4-Layer Hydraulic Brake Line Hose in the selected length